Enkay Hardness Testers have been designed and manufactured strictly conforming to IS, BS, ASTM, ISO and DIN standards. These testers are designed and manufactured for measuring hardness of metals and alloys of all types, hard or soft, flat, round, tubular or irregular in shape. The testers are simple in design, easy to operate, yet very reliable and accurate.
SMT-3A : with automatic zero setting dial gauge and manual load selection. SMT-3B : with automatic zero setting dial gauge and automatic load selection. SMT-3C : with automatic zero setting dial gauge device and automatic load selection. Brinell Hardness Testing facility according to 30 F/D2 ratio, with 187.5 kgf load and 2.5 mm dia ball indenter. SMT-4D : Similar to SMT-3C, but with additional test load of 250 kgf and 5 mm dia ball indenter for, testing Brinell hardness of non-ferrous metals according to 10F/D ration.
SPECIFICATIONS
MODEL
SMT-3A
SMT-3B
SMT-3C/D
Calibrated Weight Set kgf.
600, 100, 150
60, 100, 150, 187.5
60, 100, 150, 187.5, 250
Suitable Dial Gauge
1 pc.
1 pc.
1 pc.
Flat Testing Table 50mm dia.
1 pc.
1 pc.
1 pc.
Testing Table 40 mm dia.
1 pc.
1 pc.
1 pc.
Spot Anvil
nil
nil
nil
Sphero-conical diamond cone penetrator 120°
1 pc.
1 pc.
1 pc.
1/16" dia. Steel ball indentor
1 pc.
1 pc.
1 pc.
2.5 mm dia. Steel ball indentor
nil
1 pc.
1 pc.
5 mm dia. Steel ball indentor
nil
nil
1 pc.
10 mm dia. Steel ball indentor
nil
nil
nil
Test Block Rockwell C
1 pc.
1 pc.
1 pc.
Test Block Rockwell B
1 pc.
1 pc.
1 pc.
Test Block Rockwell Superficial 30 N
nil
nil
nil
Test Block Rockwell Superficial 30 T
nil
nil
nil
Test Block HB 2.5/187.5
nil
nil
1 pc.
Test Block HB 5/250
nil
nil
1 pc.
25x Brinell Microscope with achromatic objective & light
Steel & Metal Mechanics
