Pullout Test Apparatus : Field Monitoring & Testing Equipments : ENKAY ENTERPRISES

Pullout Test Apparatus

		Pullout Test Apparatus

		This test is performed to measure the short-term strength of an installed Rockbolt under field condition. The strength is measured by a pull test in which bolt head displacement is measured as a function of applied bolt load to give a load- displacement curve.

	Pullout Test Apparatus

	Item Code : EKE 895

	Pullout Test Apparatus 500 kN (50 Tonnes) Consists of following:

	EKE 89001 Hydraulic Centre Hole Jack 500kN (50 Tonnes) capacity with 54mm Centre Hole, 150 mm Ram Travel, DoubleActing
	EKE 89005 Hand Operated, two stage Pump
	EKE 89007 Thermoplastic Hose 6m long with pair of quick couplings
	EKE 89010 Load Gauge 150mm dia, 500kN x 5KN
	EKE 89011 Reaction Frame 500kN capacity with 90mm hole at base
	EKE 89012 High Strength Test Rod 40mm dia
	EKE 89015 High Strength Coupling Having RH thread to suit Test Rod on one end and LH thread to suit 20mm dia Rockbolt on the other end.
	EKE 89016 High Strength Coupling Having RH thread to suit Test Rod on one end and LH to suit 25 mm dia Rockbolt on the other end.
	EKE 89017 High Strength Coupling Having RH thread to suit Test Rod on one end and LH to suit 30 mm dia Rockbolt on the other end.
	EKE 89018 High Strength Coupling, Having RH thread to suit Test Rod on one end and LH to suit 32 mm dia Rockbolt on the other end.
	EKE 072 Dial Gauge 0.01 x 25 mm
	EKE 896 Pullout Test Apparatus 250 kN (25 tonnes) Same as EKE 890, except for the following:
	EKE 89101 Hydraulic Centre Hole Jack 250 kN (25 Tonnes) capacity (inplace of EKE 89001)
	EKE 89110 Load Gauge 150 mm dia. 250 kN x 2.5 kN (inplace of EKE 89010)
	EKE 89111 Reaction Frame 250 kN capacity with 90 mm hole at base (inplace of EKE 89011)