Triaxial Cells : Rock Testing Equipments : ENKAY ENTERPRISES

Triaxial Cells

		Triaxial Cells

		These cells are designed to withstand a lateral pressure of 150 bar (150 kg/cm²). Four no-volume change valves are fitted to the base for measurement of pore pressure, top drainage, bottom drainage and for entry/exit of cell pressure. The cell is nickel plated and completely rust-proof, hardened and ground pedestals and top loading pads with suitable centering arrangements for different sample sizes are provided. The lower pedestals are provided with radial grooves. The top loading pad is provided with spherical seating. Two port holes are provided to observe the sample during the assembly stage.

	Sample Preparation
	Rock Strength Testing
	Triaxial Testing
	Triaxial Cells
	Electronic Instrumentation


	Triaxial Cells


»	Item Code : EKE 211
	Triaxial Cell, for testing of samples of 35 mm and 50 mm dia

»	Item Code : EKE 212
	Triaxial Cell, for testing of samples of 75 mm, 100 mm, 150 mm, AX, BX, and NX sizes.

»	Item Code : EKE 213
	Constant Pressure System
	This is a Dead-Weight type constant pressure system. This system consists of an oil pump, continuously driven by an electric motor to provide the required pressure to the Triaxial Cell Chamber. Capacity: 160 bar (160 kg/cm²)