Enkay Enterprises
  Home   |   Email   |   Contacts  
   
 
PRODUCTS
Rock Testing
    Strength Testing
       Slake Durability Apparatus
 
Enkay Machines   Slake Durability Apparatus
     
   
The apparatus consists of a motor on base board capable of driving two or more drums at a speed of 20 rpm. A suitable number of plastic water troughs, each designed to contain a test drum with quick release drive assemblies, permit 1 to 4 drums to be driven at one time. The test drums are supported on water lubricated bearings allowing 40 mm unobstructed clearance below the drum and a trough water level 20 mm below the axis of the drum. Drums are made of brass and comprise 2 mm wire mesh cylinders of 140 mm dia and 100 mm length.
             
  Products          
 
Pointer   Sample Preparation
  Rock Strength Testing
  Point Load Index Tester
  Slake Durability Apparatus
  Triaxial Testing
 
  Slake Durability Apparatus
  Standard IS:10050
  Item Code : EKE 208
»   For determination of resistance offered by rock to weathering and disintegration when subjected to immersion in water.
»   Facility to test upto four sets of samples
»   Quick coupling for assembly and removal of drums
  The equipment consists of:
  Base Board with Motor Drive assembly with tow drum and tank assemblies. Suitable for working at 220 V, Single Phase, AC supply.
Supply with EKE20802 Electric timer, 0-30 min.
  Optional Accessories
  EKE 20801
Pair of Drums and Tank Assemblies,
including coupling, to enable upto 4 test drums to be driven at a time
  EKE 20802
Electrical Timer,
0-30 min.
  Slake Durability Apparatus : EKE208  
             
Home  |   About Us   |   Products   |   Services   |   News   |   Contact Us   |   E-mail   |   Sitemap   |   Disclaimer

All rights reserved with Enkay Enterprises