Enkay Enterprises
  Home   |   Email   |   Contacts  
   
 
PRODUCTS
Soil Mechanics
    Soil Strength Determination

       Vane Shear Apparatus

 
Enkay Machines   VANE SHEAR APPARATUS
MOTORISED
     
   
Vane Shear Tests are conducted where it is difficult to obtain suitable specimens or where intrusion from a sampling tube may cause too much of a disturbance.
             
  Products          
 
  Soil Particle Size Distribution
  Soil Load Frames
  Soil Proving Rings
  Soil Strength Determination
  Triaxial Cell
  Direct Shear Test Apparatus
Pointer   Vane Shear Apparatus
  Direct Shear Apparatus
  Direct Shear Apparatus, Electronic
  Triaxial Test Apparatus, Digital
  Geotechnical Software
  Soil Compaction
 
Vane Shear Apparatus
Standard IS : 2720 (Part 30)
Item Code : EKE 108
Consists of a torque head, adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of an electric motor which operates a worm gear arrangement turning the upper end of a calibrated torsion spring. The vane shaft is attached through the hollow upper shaft to a resettable pointer which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplied by spring factor gives the torque.
   
Rate of rotation : 1/60 rpm operates on 220, 50 Hz, Single Phase, AC supply. Supplied complete with:
EKE 10801 Container 1 No.
EKE 10802 Set of 4 Springs, each of capacity 2 kg-cm, 4 kg-cm, 6 kg-cm and 8 kg-cm. 1 No.
Optional Extra
EKE 10803 Stand, for use at the site. 1 No.
  Vane Shear : EKE108  
             
Home  |   About Us   |   Products   |   Services   |   News   |   Contact Us   |   E-mail   |   Sitemap   |   Disclaimer

All rights reserved with Enkay Enterprises